HOKA ITALIA offers to all its customers for all their products, a series of training courses for professionals capable of covering all the key points both basic and advanced all the technical details.
As part of the courses come treaties also aspects of a general nature but of fundamental importance for the radiomonitoring professional dealing with systems of data transmission, their classification, the study of the main features, analysis, recording techniques, etc.. etc..
The training courses can be kept indifferently with you abroad or one of our offices. Travel costs and subsistence that will be charged at cost or possibly incurred directly from you. For courses Basic, Advanced and Intelligence if you need to have 1 more day to verify this composition will not be counted. For any further information or clarification don't esitate to contac us.
These are our main proposals
| Start-Up |
Start-Up was developed for put you in a position to use our software in the best conditions and obtain immediately the best results. The training is of short duration (1 / 2 days) and without a real limit of participants.
These are the main points discussed:
- installation of Code300 32
- information on the security key
- possible problems during installation
- directory structure and file of Code300-32.
- portable version
- how to install updates
- uninstall
- choice of audio inputs
- how to connect the receiver to your sound card
- the configuration file "code300W.cfg"
- Clock Correction adjustment
- adjustments of the input audio level
- possible problems with sound card
- the Extended version
- how to install and use multiple sound cards in the same PC
- multiple configurations
- overview of modules decoding
- overview of the forms of analysis
- Receiver for HF / V-UHF
- Antenna for HF / V-UHF
- One or two PCs equipped with Windows
- For students participating in the course:
- An HF receiver and a PC for 2 / 4 persons
| Basic |
The training Basic normally during a period of three / four days is directed to a maximum of 10 participants, and is essentially focused on our program and in particular on the decoding and the correct procedures for tuning signals like OOK, FSK, MFSK, PSK, in Real Time and Off line.
These are the main points:
- installation and configuration
- main menu Main FFT
- main functions of the decoding modules
- Personalized Menus (. IP)
- simultaneous use of two input channels
- illustration of the basic components of measuring instruments for the analysis of the signal (signal analysis)
- illustration of the basic components of measuring instruments for the analysis of data (data analysis)
- tune as a signal HF
- tune signals OOK, FSK, MFSK, PSK
- tuning through the receiver
- tuning through the decoder
- Auto-Tuning functions
- filters and IF bandwidth
- how to prevent distortion of the audio signal
- choice of demodulator OOK, FSK, FSK, MFSK, PSK, VFT
- main measures on signals FSK, MFSk, PSK, speed, shift, center frequency
- overview of the FSK signals of type:
- ASCII / Baudot
- Sitor
- ARQ
- FEC
- FAX
- Pactor
- Packet
- CW
- overview of the MFSK signals of type
- Coquelet
- Piccolo
- Crowd 36
- NON HAM MFSK
- HAM MFSK
- Mil 188 to 141-A ALE
- overview of the PSK signals of type
- BPSK, QPSK
- MIL 188-110
- Stanag
- overview of the VHF/UHF signals of type
- VHF Selcall, (ZVEI, CCITT, CCIR, etc.. etc.,)
- POCSAG
- MPT
- EPIRB
- Inmarsat
- Receiver for HF / V-UHF
- Antenna for HF / V-UHF
- One or two PCs equipped with Windows
- DAT recorder (desk or portable)
- Audio CD Player
For students participating in the course:
- have already attended the Start Up training or use our software for at least 4 / 6 months
- have an HF receiver and a PC for up to two people
- not more to 10 people per session
Is necessary to have a day before the training to verify the proper functioning of all equipment and to study and verify how to use the spectrum HF in your area. For these preliminary tests are welcome the presence of a experienced operators.
In some cases to save time or to the impossibility of finding live some signals will be used recordings on audio files.
| Advanced |
The Advanced training normally during a period of three / four days is directed to a maximum of 8 participants, and is essentially focused on the advanced features of our program and in particular on the analysis and classification of signals, the study and classification encrypted signals, decoding and the correct procedures for tuning sophisticated signals as MFSK, PSK, both in Real Time Off line and the techniques of AF and IF recording.
These are the main points discussed:
- installation and configuration
- main menu Main FFT
- main functions of the decoding modules
- Personalized Menus (. IP)
- simultaneous use of two input channels
- illustration of the basic components of measuring instruments for the analysis of the signal (signal analysis)
- illustration of the basic components of measuring instruments for the analysis of data (data analysis)
- how to tune an HF signal
- how to tune signals as OOK, FSK, MFSK, PSK
- tuning through the receiver
- tuning through the decoder
- Auto-Tuning functions
- filters and IF banwidth
- how to prevent distortion of the audio signal
- choice of demodulator OOK, FSK, FSK, MFSK, PSK, VFT
- main measures on signals FSK, MFSk, PSK, speed, shift, center frequency
- overview of the FSK signals of type:
- ASCII / Baudot
- Sitor
- ARQ
- FEC
- FAX
- Pactor
- Packet
- CW
- overview of the MFSK signals of type
- Coquelet
- Piccolo
- Crowd 36
- NON HAM MFSK
- HAM MFSK
- Mil 188 to 141-A ALE
- overview of the PSK signals of type
- BPSK, QPSK
- MIL 188-110
- Stanag
- overview of the VHF/UHF signals of type
- VHF Selcall, (ZVEI, CCITT, CCIR, etc.. etc.,)
- POCSAG
- MPT
- EPIRB
- Inmarsat
The Advanced training can be done at your location or in one of our offices, for a good success is necessary to have a working radiomonitoring station with these elements:
- Receiver for HF / V-UHF
- Antenna for HF / V-UHF
- One or two Windows PCs
For students participating in the course:
- have already attended the Start Up training or use our software for at least 4 / 6 months
- have an HF receiver and a PC for up to two people
- not more to 10 people per session
Is necessary to have a day before the training to verify the proper functioning of all equipment and to study and verify how to use the spectrum HF in your area. For these preliminary tests are welcome the presence of a experienced operators.
In some cases to save time or to the impossibility of finding live some signals will be used recordings on audio files.
| Advaced Options |
The training Advanced Options normally have a duration of one / two days is directed to a maximum of 4 / 6 participants, and focuses exclusively on the use of systems like:
- Codan 9001/3012
- Codan Chirp
- Pactor III
- Clover II
- Clover 2000
These are the main points discussed:
- principle operating systems
- typical use of these systems
- structure signal
- data structure
- procedures tuning
- tuning through the receiver
- tuning through the decoder
- Auto-Tuning functions
- filters and IF bandwidth
- how to prevent distortion of the audio signal
- main measures speed, shift, center frequency
- how to recover the data
The training Advanced Options may be held at your location, or one of our offices, for a good success is necessary to have a working radiomonitoring station with these elements:
- Receiver for HF
- Antenna for HF
- One or two PCs equipped with Windows
For students participating in the course:
- have already attended the course Advanced or use the software for at least 6 / 8 months
- have an HF receiver and a Windows PC for up to two people
- no later than 6 people per session Course
You will need to have a day before the course to verify the proper functioning of safety equipment and to study and verify how to use the spectrum HF in your area. For these tests Preliminary welcome the presence of experienced operators.
In some cases to save time or to the impossibility of finding live some signals will be used recordings on audio files.